Sanitation Sprinkler

Composition: It is mainly composed of chassis, anti-rust tank, connector, special self-priming sprinkler pump, pipe network, spray outlet, and working platform; it has the functions of sprinkler, water transport, drainage and emergency fire fighting. From front flushing, rear spraying and side spraying, self-priming special water pump, the pump can pump and drain water, with fire joints, artesian valve, with a working platform behind the tank, installed green sprinkler cannon, the cannon can be rotated to adjust the water volume (spray column, fog, drizzle).

Principle: The engine starts to drive the pump, and the impeller rotates at this time, and negative pressure is formed at the inlet of the impeller. The gas in the suction pipeline is mixed with the liquid in the pump, and enters the gas-liquid separation chamber through the extrusion chamber. Due to the difference in specific gravity of the gas and liquid, the gas is separated from the liquid and discharged from the outlet pipe, and the liquid sinks in the gas-liquid separation chamber. After many cycles, the gas in the suction pipe is discharged and filled with liquid, and the self-priming process is completed. , the pump starts normal infusion. The sprinkler is mainly driven by the engine to drive the gearbox, and the power take-off installed on the gearbox drives the sprinkler pump, which generates power and sprays the liquid inside the tank through the pipe network.