Common faults and solutions of sprinkler

First, when the sprinkler pumping can not be pumped up
1. When you find that the water can not be pumped up in the operation of the sprinkler, you need to check whether the sprinkler pipeline is sealed, if the inspection of the sprinkler pipeline has been sealed, then we should then check the sprinkler rubber pad, adjust the thickness of the gasket, tighten the screws related to the joint.
2. After checking the above parts do not have any problems, then we should check whether the sprinkler filter into the water is deep enough, if not, we only need to deep put the sprinkler filter can be.
3 sprinkler pump can not pump up the water may also be the sprinkler pump vacuum is not good, in the use of the sprinkler pump is qualified under the condition of the regular product, the user can according to the sprinkler manufacturers issued by the sprinkler pump instructions to troubleshoot.
4 sprinkler pump if the sprinkler can not pump up the water, the user can see if the sprinkler pump can divert water, add enough to divert water.

Two, the sprinkler sprinkler width is insufficient
1. Check whether the speed of the sprinkler pump can not reach the rating. We only need to add the accelerator and improve the engine speed of the sprinkler to reach the rating of the speed of the sprinkler pump.
2. Check whether the sprinkler sprinkler spraying Angle is correct, if we only need to adjust the Angle of the sprinkler nozzle can be solved. If the sprinkler width is still insufficient, we can check whether the sprinkler pipeline is blocked or leaked, just need to exclude it.

Three, the sprinkler pump has noise or vibration
1. The bearing clearance of sprinkler pump is too large;
2. The gear clearance of sprinkler pump is too large;
3. The gearbox of the sprinkler pump is short of oil. In the use of the sprinkler pump is qualified under the condition of regular products, we can according to the sprinkler manufacturers issued by the sprinkler pump instructions to check the fault, one will be eliminated.

Four, ball valve control failure
Sprinkler ball valve control failure may be the cylinder failure, the user needs to check whether there is loose sprinkler electrical road; There may also be sprinkler ball valve spool damage, just replace a new ball valve can solve the problem.