Garbage truck water tank leakage, teach you a few simple and practical maintenance skills

1. Check whether the water tank cover is tightly fastened;

2. Test gas into the water tank to see where the water in the water tank seeps from when it is pressurized, and then decide the repair plan;

3. Twist the cover of the engine oil to see if there is any oil emulsification trace, if there is, disassemble the engine to replace the cylinder pad;

4. If the garbage truck is in the process of driving, the road is difficult to walk, the car vibration is too large, so that the water tank water pipe breaks and leaks, measures can be taken according to the specific situation: when the leak does not exceed 1mm crack or 2mm hole, add a bottle of water tank strong plugging agent to the water tank and start the car to run.

5 to 10 minutes after the cooling water begins to circulate, the cooling system, whether it is the water tank or the rubber tube and the pads everywhere, will stop leaking at the water leakage, do not need to be released after the leakage, will not affect the heat dissipation and blockage.