Municipal road cleaning sweeper

Cleaning car refers to the vehicle that undertakes the cleaning, washing and cleaning operation of the roads in urban areas or national roads, highways and so on. The vehicle is equipped with two brush trays, medium wide suction cups, or four trays and rear suction ports. Type of road working vehicle.

1) The vehicle integrates the functions of road sweeper, sprinkler and high-pressure cleaning vehicle, and has a variety of operating functions such as road cleaning, road cleaning, high-pressure cleaning, low-pressure washing, roadside stone washing, garbage collection, sewage recovery, spray dust removal, road separation wall cleaning, small advertisement cleaning and so on.

2) Adopt the structure of "two vertical sweeps in the middle + wide suction nozzle (built-in high-pressure water spray rod) + left and right high-pressure side spray rod".

3) Advanced CAN bus and intelligent one-button control technology are adopted. All operations are completed in the driver's room. When operating, only the operation mode is selected, and the startup and shutdown of each operating mechanism are automatically controlled by the program. There are 9 operation modes including full cleaning, left cleaning, right cleaning, full cleaning, left cleaning, right cleaning, full sucking, left cleaning and right cleaning.

4) The auxiliary engine manual throttle control system is added on the basis of one-button control technology, which can adjust the throttle size independently according to road conditions, effectively enhance the cleaning effect and reduce fuel consumption.

5) Up to 16 voice prompts and music alarms can accurately broadcast various safety tips and failure points.

6) With astern protection device, in case of emergency astern in the process of operation, intelligent control system will automatically stop the operation and recover the sweep disc, sucker and side spray rod; With protection to prevent rollover of lifting dustbin; With maintenance safety protection.

7) With dustbin lifting safety protection device, when the back door is not opened, to ensure that the dustbin cannot be lifted.

8) When the safety bar is not put down, the intelligent system will prohibit the dumpster to return, which can effectively prevent the occurrence of accidents during maintenance.

9) Adopt the middle full floating double suction super wide suction nozzle, suction diameter up to 180mm. The built-in long row of high pressure water jet rod has small ground clearance, large water flow impact force, and can directly send sewage to the suction port, less operation spatter, and high sewage suction rate.

10) The appearance of the vehicle adopts the folding structure, which effectively reduces the weight and enhances the strength and stiffness of the dustbin; The vehicle adopts three-section, pre-connected water tank and mid-connected bunker cover, which is reasonable in structure and can be detachable for easy maintenance.

11) The rear door closing and locking mechanism adopts latch type, which has good stability and good airtightness.

12) The auxiliary engine with the car clutch, starting and stopping, the cylinder drive clutch separation, after the delay of engagement. Clutch separation and engagement, automatic control by the electronic control system, no manual operation, effectively avoid fan, high pressure water pump, engine damage.

13) The high pressure water pump is imported from Germany. When the high pressure water pump starts and the working water valve switches, the water pump can be automatically unloaded. Through empty circulation, safety valve and relief valve triple protection, effectively prevent high pressure water pump damage.

14) Imported hydraulic valve can ensure the stability and fluency of the hydraulic action of the vehicle.

15) Hydraulic motor, can ensure the stability of the sweep plate rotation, long service life.

16) The sewage tank adopts a large plane slope structure, and the unloading Angle can reach 50 degrees, making it easier to dump garbage. The sewage tank is equipped with an anti-overflow alarm device and a high-pressure spray cleaning device. The anti-overflow alarm device can prevent sewage from overflowing from the straw during operation, causing secondary pollution;

17) The dustbin is made of 4mm stainless steel, which can prevent general corrosion and prolong the service life.

18) The water box is equipped with a low water level sensor alarm system, which will automatically alarm when there is no water to prevent water shortage and damage to the pump.

19) The side and rear parts are equipped with mechanical automatic winding washing coil, equipped with 20m high pressure hose and different Angle cleaning gun, which can be used to clean the body and other equipment and facilities.

20) A high-definition monitoring probe is set in the rear of the right sweep plate and the dustbin, and a high-definition LCD display is set in the driver's room. The picture can be switched to the position of the right sweep plate and the rear position of the dustbin respectively. During operation, the working condition of the sweep plate and the working quality of the vehicle can be monitored.

21) Hydraulic system gear pump using domestic pump, reliable performance, valve parts manufacturer is an internationally recognized hydraulic assembly factory.

22) A manual pump is added in the hydraulic system, so that when the system meets special circumstances, such as the auxiliary engine cannot work normally, it can use the manual pump to complete the garbage dumping and the reset of each hydraulic cylinder. With anti hydraulic leakage function.

23) Low pressure water pump adopts domestic brand, pneumatic ball valve in the cockpit control, hedge width up to 21 meters.

24) High performance engineering plastic spacer is used in the brush arm of the sweep disc, good wear resistance, no butter, no maintenance, save manpower and material resources.

25) Double-layer stainless steel vacuum cylinder, easy to replace the vacuum cylinder after long-term wear.