The kitchen garbage truck operates at 6 standard air pressures before loading garbage

Kitchen garbage truck (hereinafter referred to as garbage truck) is a special vehicle suitable for the collection, transportation and loading and unloading of urban household garbage in bags, barrels and bulk. The garbage is pressed into the car box by the compression mechanism, so that the kitchen garbage is evenly distributed in the car box with a high density until it is full. The garbage collection and transportation mode of the restaurant kitchen garbage truck is the garbage collection and transportation mode widely used in the world at present. The functions of its special devices are all powered by the automobile engine and realized by the hydraulic mechanism. The body, filler and sewage tank of the vehicle are all sealed and welded with high quality low alloy steel plate, which has the advantages of high strength, light weight and no secondary pollution.
Before loading garbage, when the no-load operation of the kitchen garbage truck reaches 6 standard air pressures, hang up the force collector (on the lower left of the steering wheel in the driving room), check whether each component has leakage or abnormal, and then operate according to the position indicated by the operation indicator; The specific operation steps are as follows:
Step 1. Push the operation handle of the locking hook to the recovery position, and the locking cylinder is recovered, so that the locking frame is recovered, and the turning frame and the attached frame are locked and fixed;
Step 2. Pull the operation handle of the pull arm to the extension position, the pull arm cylinder is extended, and the movable pull arm rotates around the front hinge shaft of the flip flip frame. The pull arm is in the position of the hook box, and the height of the hook of the pull arm is properly adjusted and aligned with the bending hook of the box;
Step 3. When the pull arm hook is hooked to the bent hook of the box body, continue to push the operation handle of the pull arm down to the falling position, so that the refuse body continues to board the car (Note: ensure that the longitudinal beam of the refuse body is located between the two rear rollers at the end of the attached frame).
Step 4. When the garbage box is placed on the attached frame, loosen the operation handle of the pull arm to make it return to the middle position, and then pull up the locking hook operation handle to the locking position. The locking cylinder is extended to make the locking frame turn up and lock and fix the turning frame with the garbage box.
Step 5. Before unloading the garbage, hang up the force extractor when the vehicle runs up to 6 standard air pressures, open the rear door lock device of the dumpster, at the front two-way multiway valve, first determine the locking frame to lock the garbage box (pull up the locking hook operating handle to the locking position), and then pull up the pulling arm operating handle to the extended position, the garbage box is ready to tilt to lift the garbage out.
This vehicle is widely used in urban street and school waste disposal. For users with special requirements, we can modify them according to their requirements.
As one of the key equipment in the garbage transportation chain, the kitchen garbage truck should not only be regarded as "transportation equipment", but should strive to become an indispensable comprehensive transportation system in the kitchen garbage transportation chain. Sanitation kitchen garbage truck not only needs to carry fast moving goods, but also needs to control the status of goods in the process of moving and the recording and transmission of information.