Working principle and operation of compressed garbage truck

The working principle of the compressed garbage truck is basically divided into two kinds: loading and unloading. There are five key actions of the compressed garbage truck in total, which are the turning plate turning and recovery, the scraper opening and closing, the scraper falling and rising, the pushing plate recovering and pushing out, the tail lifting and locking, which are the main five actions of the garbage truck.
When the stuffing bucket is filled with garbage, the scraper opens, the skateboard drives the scraper to move down together, inserted into the garbage for crushing and first compression, the scraper turns forward, further compacts the garbage, the scraper moves upward with the skateboard after it is in place, compacts and fills the garbage into the garbage bin, and then returns to the starting position. Automatic control of the whole working process, in the continuous filling of garbage, push shovel under the action of extrusion pressure, to overcome the back pressure step back, to achieve two-way compression of garbage and evenly filled the whole bin. In daily life, the compressed garbage truck brings us great convenience. It compresses the daily household garbage in the garbage truck and completely solves the problem of secondary pollution in the process of garbage transportation.

Operation process of garbage truck :1. Put the truck in neutral and start the compressed garbage truck, step on the clutch, hang the force extractor, and pull the brake.
2. Manipulate the control box or multiway valve to hang the garbage can on the flip mechanism, and flip the garbage into the arc bucket
3. Operate the slide board and scraper to make the garbage enter the arc box and complete a working loading (continuous loading can be carried out when the garbage is long).
4. After the loading is completed, operate the inner pushing plate of the arc box for compression. Wait for a while to check around the car body, and no one can close the force harvester and drive away.
5. When unloading, hang up the force extractor to operate the multi-way valve or CAN electric control box to lift the bucket body.
6. Push the garbage outward with the multiway valve or CAN control box.

7. After unloading, the bucket body will be returned through the multi-way valve or CAN control box, turn off the force harvester to complete the unloading operation, and check around the body before getting on and driving away.