Snow removal vehicle conclusion

Substitute the above-determined parameters and coefficients into the corresponding formulas, and pay attention to the values of the relevant parameters, so as to make the result as large as possible, that is, 3m/s; the various parameters of a 125-type motorcycle used for the test meet the test requirements; The test speed is 30,40,45,50,55,65,70km/h. Improve the combined RMS acceleration at the seat at a speed of 65km/h for front and rear. Obtain the total traction power PZ=155kW of the snow removal vehicle and the total power PL=60kW of the snow throwing device. Therefore, the power of the selected snow removal vehicle should be greater than 155kW; an additional engine, whose power should be greater than 60kW, should be installed in the car On the chassis, it is used to drive the snow removal roller to rotate and provide a power source for snow blowing of the snow blowing mechanism.

It can be seen from the above analysis and calculation that the snow removal vehicle integrates the functions of the front snow removal shovel, the middle snow removal roller, the rear snow removal roller and the snow blowing mechanism. It is advanced and comprehensive in functional design. Under the action of the snow removal roller, it can remove the snow that has been compacted to a certain extent (non-ice state). The snow removal efficiency is high and the snow removal accurately reflects the engine excitation. The overall vibration level at the improved handlebar and seat is reduced, and the vibration comfort of the whole vehicle is improved.