Fulongma Electric Garbage Compression Truck for Peru

Meeting customers' expectations is our pursuit, while providing customers with quality sewer tank truck, manure suction truck, sweeper snow truck is our promise. Service commitment can produce positive feedback, which may give customers motivation and basis to appeal against service quality problems, so that enterprises can clearly understand the gap between the quality of services provided and the quality expected by customers. Our grasp of market research and demand keeps our products innovative and diversified. The company establishes a contract with its employees to form a community of interests to meet the diverse spiritual and cultural needs of employees. Our factory has established a sound operation and management system and a strict standardization system as well as a product quality assurance system to adapt to the development of modern technology and high competitive ability.

LYSZ20CY garbage Transfer compression stations is my company according to the specific situation of the domestic sanitation equipment, the response country garbage classification requirements, the advanced technology and technology of the garbage disposal at home and abroad for reference, and research and development of new products, mainly used for the residents of urban streets, commercial districts, factories, schools, hospitals, wet garbage (excluding eat hutch garbage) are collected.
LYSZ20CY garbage Transfer compression stations uses scraper and slide horizontal compression technology. The compressor and garbage bin are integrated, and the collected wet refuse is compressed directly into the closed garbage bins for reduction and transfer by carriage detachable garbage truck. The equipment has the characteristics of less odor, no secondary polluion, small occupation area, flexible and so on. It is especially suitable for new transfer station and old station reconstruction in urban areas where land acquisition is difficult and the site is small. LYSZ20CY garbage Transfer compression stations is suitable for loading 120L, 240L, and 660L standard garbage bins, and can also dock with Zoomlion 5033ZZZ, 5040ZZZ, 5070ZZZ, 5065ZYS, and 5082ZZZ garbage collection trucks. It is environmentally friendly, economical, efficient, adaptable, and flexible to operate. 

Station docking mode

Complete set of compressor equipment configuration

Refuse station equipment	Supporting vehicles (purchased separately)	note
LYSZ20CY integrated garbage compressor	ZLJ5251ZXX series carriage removable garbage truck
	ZLJ5311ZXX Series Unloading Garbage Truck (short wheelbase)

LYSZ20CY integrated waste compressor and supporting vehicles

Main components of compressor

LYSZ20CY integrated garbage compressor consists of body assembly, pressure filling mechanism, unloading door, bucket flipping mechanism, front cover assembly, electric control system and hydraulic system.

LYSZ20CY integrated garbage compressor schematic

Body assembly is the connecting body of each functional component, which constitutes the overall structure of the equipment. The front end of the body assembly is a compression bin, which is a channel for garbage compression. The back end of the body assembly is a dustbin, which is the volume of loaded compressed garbage.

2、The pressure filling mechanism is located in the upper part of the body assembly compression bin. It is a pressure device that presses the garbage from the compression bin into the dustbin through the scraper and slide plate mechanism. It can effectively compress the garbage.

3、The discharge door is located at the rear of the equipment and is the device for discharging garbage.The bucket turning mechanism is installed in the front part of the compression body, which is the feeding device of the compressor. It is also suitable for loading 120L, 240L and 660L standard garbage cans.

The front cover assembly is installed in the upper part of the feeding port, which plays a role of opening and closing the feeding port to prevent sewage and garbage sprinkling

4、Electronic control system is the control center of the compressor, all actions are controlled by the PLC program, can achieve the following main functions :(1) can realize automatic filling cycle, when pressing the press filling cycle button, the pressure filling mechanism can automatically move back and forth in the compression chamber; (2) Full pressure alarm: When the garbage in the garbage box is pressed to a certain density, by analyzing the pressure value of the hydraulic system, from the perspective of safety, protection equipment and efficiency, the system will automatically alarm; (3) Can realize automatic fault diagnosis, when the compressor can not work normally, can automatically judge the cause of the fault, and display on the screen, at the same time to achieve abnormal cause analysis voice broadcast (optional); (4) Hydraulic system protection: when the hydraulic system oil temperature is high, the system will automatically start the cooling system; When the oil temperature is too low, the system automatically starts the hydraulic oil heating system, until the oil temperature rises to the appropriate temperature (optional); Hydraulic system: the use of "double pump" and efficient hydraulic control loop, improve product efficiency and reduce energy consumption; Hydraulic system layout combined with the existing space and maintenance convenience, the power part and control part of the separation, compact structure, convenient maintenance. The main components of the system adopt foreign well-known brands to ensure high reliability of the system.

Compressor features
1、Functional characteristics analysis:
1) The top pressure filling device effectively avoids soaking of sewage and ADAPTS to wet garbage collection;
2) Spherical tail door with double oil cylinder locking, effectively solve sewage leakage;
3) Station docking feeding and standard plastic bucket feeding dual mode integration, enhance the adaptability of equipment;
4) With phase sequence switching function of three-phase power supply;
Liquid crystal display function;

6) With full pressure alarm and display function;
7) Automatic heat dissipation and heating function of hydraulic system (optional);
8) With wire control and touch double control function (optional wireless remote control);
9) With emergency stop control function;
10) With automatic fault alarm and automatic diagnosis function, to achieve abnormal situation cause analysis voice broadcast (optional);
11) The rear door of the equipment box adopts hydraulic locking, which can be directly controlled to open and lock the rear door of the box in the cab of the detachable garbage truck.
2、Introduction to stability and reliability:

1) The compression bin part of the body assembly adopts a rectangular structure, which is convenient for the compression mechanism to realize compression. The dustbin part adopts a circular structure, which is convenient for garbage storage and unloading, and has excellent mechanical properties.
2) All exposed ferrous metal surfaces are treated with rust prevention, and steel in direct contact with garbage are treated with acid pickling, phosphating and passivation.

3) The equipment is controlled by PLC.
4) Key parts of the equipment: hydraulic control valve, oil pump, motor, electronic control components are well-known brands at home and abroad.
All rotary hinge shafts are made of special self-lubricating bearings or joint bearings, and the piston rod surface of the cylinder is plated with chrome, which has strong wear resistance and corrosion resistance to ensure its service life in harsh environments.
3、Introduction to energy saving and environmental protection:
Small floor area, no civil construction or only simple civil construction, economical and practical, flexible, suitable for wet garbage collection and transport; Hand-held wire control button box or wireless remote control (optional), effectively improve the working environment of operators; Ball-shaped unloading door locking mechanism and sealing structure, to ensure garbage compression and transfer process, no sewage leakage.

Double pump drive, the system needs high pressure, the use of single pump work, the system needs high speed, the use of double pump work, high efficiency and energy saving, the system heat.

It can dock with Zoomlion garbage collection truck 5033ZZZ, 5040ZZZ, 5070ZZZ, 5065ZYS and 5082ZZZ at the station, without the need to go through the secondary hopper loading, effectively avoid the traditional operation mode of garbage truck unloading and hopper loading dust and garbage problems, while improving the operation efficiency.

 
Introduction to compressor Advantages
1) The driving cylinder of the pressure filling device is located at the top of the compression bin and its closed design is suitable for the treatment of wet garbage.
2) Strong adaptability, that is, can meet the station docking with Zoon 5033ZZZ, 5040ZZZ, 5070ZZZ, 5065ZYS, 5082ZZZ garbage collection truck, and can meet the 120L, 240L, 660L standard garbage bin loading.
3) Realize a new docking mode with Zoomlion garbage collection vehicles 5033ZZZ, 5040ZZZ, 5070ZZZ, 5065ZYS and 5082ZZZ at the station, which is highly efficient and energy saving. It changes the secondary feeding docking mode of garbage collection vehicles and integral garbage compressor, which first dumps garbage to the hopper and then turns the hopper to the compression bin, and the primary feeding docking is completed. Efficiency has been greatly improved. Reduce the operator's working intensity. Compared with the traditional operation mode, the primary feeding replaces the secondary feeding, the energy consumption of equipment is reduced, and the operation process and operation are simplified.
The pressure filling device is located at the top of the compression bin at the front end of the body assembly. The pressure filling cylinder has no risk of sewage soaking in the traditional compression cylinder, and the service environment of the cylinder is greatly improved and the service life of the cylinder is greatly prolonged.
5) The pressure filling device has high pressure filling efficiency, with a single stroke compression volume of 2.35m³, which is in the leading level in the industry.
6) The hydraulic pump station and the hydraulic valve group are located at the left and right sides of the bottom of the middle part of the equipment respectively, with compact structure and convenient maintenance, while reducing the center of gravity of the equipment and improving the safety of transportation.
Good environmental performance, no exposure, scattering, dripping phenomenon in the process of garbage docking and transfer.
8) The use of high efficiency and energy saving, reliable performance of the double pump, the system needs high pressure, the use of single pump work, the system needs high speed, the use of double pump work, high efficiency and energy saving, the system heat.
9) The new latch locking mechanism is adopted, the upper and lower four points are locked, the compression of the sealing strip is stepless adjustable and has the function of automatic anti-decoupling, the locking is reliable (even in the case of driving cylinder leakage), and the sealing is good.
10) There is a sewage outlet on both sides of the compression bin at the front end of the body assembly, and a sewage outlet is provided at the same time, which is convenient to clean up the garbage at the sewage outlet and assist the sewage discharge.

11) Unloading door adopts new spherical structure, beautiful appearance and reliable structure.

Operation process introduction (see operation process flow chart)

LYSZ20CY process introduction
1.1 Garbage collection and compression
After the wet garbage collection of urban residents, the garbage is directly dumped into the feeding port of the compressor by self-loading garbage truck (5033ZZZ, 5040ZZZ, 5070ZZZ, 5065ZYS, 5082ZZZ), or the standard garbage bin of 120L, 240L and 660L is used for loading, and the bucket turning mechanism is operated for unloading. Then operate the pressure filling cycle button to compress the garbage poured into the compression bin, repeat the above process until the pressure alarm is full, the operation front cover assembly closes the feeding port, the bucket turning mechanism is operated to discharge state, the activity hook is turned up to transport state.
1.2Packing get on the bus
The unloading garbage truck of the carriage is poured into the front of the compressor, so that the hook of the pull arm is aligned with the hook of the compressor, and the unloading garbage truck of the carriage is operated to pull the compressor on and lock the compressor.
1.3 Garbage transit

Start the carriage removable garbage truck to take the compressor full of garbage out of the garbage station and to the landfill or other garbage disposal site.
1.4 Dustbin discharge

After the carriage removable garbage truck arrives at the landfill or other garbage disposal site, the lock device of the unloading door on the compressor is loosened through the hydraulic system of the carriage removable garbage truck, and then the pull arm lifting mechanism is operated to lift the compressor until the garbage in the box is completely discharged.

LYSZ20CYIntegral waste compressor operation process flow chart

 
Main technical specifications and performance parameters of compressor

Compressor model		LYSZ20CY
Processing form		The installation type
Compression way		Scraper slide type horizontal compression
Theoretical garbage handling capacity (T /h)		20
Storage bin volume (m³)		5
Single stroke compression volume (m3)		2.35
Dustbin volume (m3)		18
Maximum compression force (kN)		190
No-load loading cycle time (s)		28
Working cycle time of bucket turning Mechanism (s)		22
Motor power (kW)		7.5
Machine weight (kg)		5300
Construction dimensions (transportation condition)	Long (mm)	6650
	Width (mm)	2530
	High (mm)	2610
The power supply		380V/50Hz/10kW

Supporting vehicle -- carriage removable garbage truck
The vehicle can load and unload itself, with a large load, high transportation efficiency, strong mobility, easy operation, safe and reliable, high degree of automation, a wide range of applications and other advantages.

The technical parameters of the carriage removable garbage truck are as follows:

1.Equipment installation and water and electricity requirements

Users can determine the configuration of garbage station equipment and vehicles according to the local geographical location and garbage disposal volume. Dimensions are marked in the following garbage station layout diagram for users' reference.

Single-position power requirements: The customer shall provide three-phase, five-wire, 380V/ 10kW external power supply, equipped with the corresponding circuit breaker with leakage protection (In < 30mA). The distance between the power supply and the compressor shall not be more than 10 meters.
Water source requirements: conventional water, the minimum intake pipe is 1 inch.

Building requirements: LYSZ20CY building clearance height is not less than 6 meters; The clearance height inside the gate shall not be less than 5.5 meters, and the width of the gate shall not be less than 4 meters.
The drawings and technical instructions only show the installation requirements of the equipment. The designer can design the facilities such as staff lounges, toilets, sewage Wells and sedimentation Wells according to the surrounding conditions. To facilitate dredging, it is recommended that the septic tank be placed outdoors.

LYSZ20CYSingle station construction plan

These endeavours include the availability of customized designs with speed and dispatch for Fulongma Electric Garbage Compression Truck for Peru. We meet the new form of the market with far-sighted eyes, actively strengthen the cooperation with international manufacturers, and establish a long-term cooperation and exchange with many foreign companies to promote the production vitality of internal and external information exchange. We recruit talented people with an open and tolerant mind, encourage innovation and tolerance of failure, and recognize and respect differences and individuality.

Hot Tags: garbage transfer compression stations, China garbage transfer compression stations suppliers, manufacturers, Low-pressure water vehicle, outdoor power sweeper, Low pressure water vehicle, mechanical cleaning equipment sweeper, high pressure washing truck, Zoomlion Multifunctional Low Pressure Power Road Washer