Cleaning And Maintenance Steps

Before cleaning, the body surface temperature should be cooled to below 60°C, and the ambient temperature should be maintained at 0 to 40°C. The water gun is more than 15 cm away from the paint surface of the body. The order of flushing is from the roof to the sides. When washing the grille in front of the car, mist water should be used, and the water column should not be flushed against the cooling fins of the water tank or condenser. If the plastic dome is installed on the fender, it should be removed and cleaned, and the fender should be thoroughly cleaned. , the inner side of the fender.

1. To remove the stubborn traces remaining on the car body, you can carefully scrub with all-purpose descaling water and a clean cotton cloth, then wring out the clean cotton cloth dipped in car wash liquid, and dry the paint surface of the car body along the direction perpendicular to the driving of the car. on the car wash. Finally, rinse the car wash with plenty of water, and dry it with a synthetic sheepskin towel in time. Wipe dry to achieve no water marks on the whole car and no stains on the glass

2. High-pressure water gun cleaning is to use a high-pressure water gun to wash away the sediment contaminated on the surface of the car body from top to bottom, then wash the rear of the car body, and finally wash the lower part of the car. Note that in this step, the chassis should be thoroughly rinsed, and the edges, bends, fenders, etc. should be thoroughly cleaned. In particular, the wheels, brake discs, fenders, front grilles, door inner frames and skirts should be thoroughly washed with sand and dirt.

3. Wipe, use a car wash sponge dipped in shampoo car wash liquid, wipe the car body once, if the contamination is not easy to remove, you can wipe it repeatedly. Note that the sponges on the upper and lower parts of the car body should be used separately, so as to avoid the sand on the lower part of the car body from scratching the paint surface of the car body. Then rinse with high pressure water, especially the residues such as foam at the seams and corners of the car. 4. Apply the liquid and sprinkle the shampoo car wash on the body. There are two methods, one is to use a multi-functional high-pressure foam cleaning machine, and the spraying should be uniform, and the nozzle should be shaken up and down regularly; Dewaxing detergent.