Water
video
Water

Water Tanker Truck with Spray Nozzles

ZBF5070GPSBJE6 Water Tanker Truck With Spray Nozzles is a new type of green spraying vehicle developed by the company.

Product Introduction

Product specification

ZBF5070GPSBJE6 Water Tanker Truck With Spray Nozzles is a new type of green spraying vehicle developed by the company. The car is refitted with bj1076vejda-51 type II chassis of BAIC Futian Automobile Company and special operation device and control system.The special operation device includes fog gun system and low-pressure waterway system, in which the fog gun system includes fuel oil generator set, water pump, fog gun, etc. The low-pressure cleaning system is equipped with front duckbill flushing device, middle hedge flushing device, rear sprinkler, greening irrigation device and water cannon.
Water Tanker Truck With Spray Nozzles has various functions, beautiful and generous appearance, and has superior performance of high efficiency, environmental protection and reliability.

1


Functions

Water Tanker Truck With Spray Nozzles can realize many functions such as greening spray, spray and dust suppression, low pressure cleaning, greening and watering.


Application

This product is suitable for cleaning operations in city roads, highways, squares and port wharves, and also can spray dust in square, wharf, mining area, demolition site, coal yard and steel mill to regulate air humidity. It is also suitable for forestry, garden department greening maintenance, Miao Mupei breeding and new plant irrigation. High pressure hand-held spray gun is used to clean the ground, sidewalks, non motorized lanes, squares, etc. In case of sudden power failure, the fuel generator can be used for emergency power generation. The self-priming device can be used in sites lacking pressurized tap water to realize independent water addition and expand the operation range of vehicles. It is not suitable for use in the environment where the weather is cold and easy to freeze.


Main structure &performance features

2

1、Chassis
BJ1076VEJDA-5 chassis of BAIC Foton automobile company is adopted for modification, with strong power and strong bearing capacity.
The full diesel q23-115c60 diesel engine with rated power of 85KW and rated speed of 3000r / min is adopted, and the emission meets the national six standards.
2、Water Cistern
The total volume of the water tank is 4.9M ³, Effective volume 3.9m ³。 The water tank has large volume and long working time. The water tank adopts the finite element analysis method to optimize the design, and has passed the strict reliability test. The water tank adopts advanced one-time can wrapping forming technology, robot automatic welding, penetration nondestructive testing, no water leakage and long service life. The anti-corrosion coating is adopted inside the water tank to ensure the anti-corrosion effect
3、 Fog gun system
The fog gun system is made up of power system, control system, water supply system and air gun system. The gasoline generator is used to provide power source for the control system, and the high pressure water system is combined with the wind gun system to realize the remote spray function of pitching angle and horizontal rotation angle. The efficiency of the artillery is high, the maximum distance is 20m, the pitch angle is -5 to 60 degrees, and the rotation angle is -180 to 180 degrees.
4、Low pressure waterway system
Low pressure water pump. The famous self-priming centrifugal pump is adopted, with rated speed of 1450rpm, rated working pressure of 0.45MPa and rated flow of 40m ³/ H /, high efficiency and good reliability.
Front duckbill flushing device. The front duckbill flushing device is controlled by a manual ball valve and is suitable for flushing the road surface and curb. The flushing direction of the duckbill nozzle can be adjusted arbitrarily through a special structure, and the flushing width is not less than 6m.
Medium flush device. The middle counter flushing device has a conical nozzle on the left and right, two-way flushing, which is controlled by the manual air valve. The nozzle angle can be adjusted arbitrarily by adjusting the rotating sleeve, and the flushing width is not less than 14m.

Rear sprinkler. The rear sprinkler adopts manual ball valve to control the opening and closing of the rear sprinkler respectively. When two rear sprinklers are opened at the same time, the sprinkler width shall not be less than 12m.
Water cannon. The water gun is an aluminum long-range water gun, which is installed on the right side of the rear workbench. The water gun can rotate from 0 ° to 360 ° and the gun body can be tilted up and down. The adjusting sleeve at the front of the gun body can adjust the jet shape (cylindrical or conical) of the water flow and close the water gun. The water gun is controlled by manual ball valve and can be opened and closed. The range of the water gun is not less than 28m.
Greening watering device. The greening watering device is divided into left greening watering device and right greening watering device, which are installed on the left and right sides of the rear of the vehicle respectively, and the manual ball valve is used to control the opening and closing of the watering path.
5、Operation method
The vehicle adopts the control mode of "handheld remote control + manual operation". The special operating mechanism of the green spraying vehicle is divided into three parts: the remote controller of the fog gun system, various manual ball valves distributed in various parts of the vehicle, and the music horn and power take-off switch integrated on the central console.
The switch of music horn and power take-off switch are integrated on the chassis center console.
The fog gun system controls the pitching, pitching, left and right rotation of the fog gun, and the opening and closing of the fan and high-pressure water pump by the remote controller.
The front duckbill, middle hedge, rear watering, left and right greening watering and rear watering are controlled on and off by manual ball valves.


Main technical parameters

Item

Unit

Parameter

vehicle parameters

curb mass

kg

3620

Max total mass

kg

7360

shape size(lengths*width*height)

mm

6660×1960×2600

Min ground clearance

mm

209

effective volume

3.9

max volume of cistern

4.9


Operating performance

Low pressure waterway system

operating speed

km/h

Ⅰ:6.6;Ⅱ:13

Max cleaning water r pressure

MPa

1.1

cleaning water discharge

L/min

250-700

front duckbilled washing width

m

≥6

sprinkle width

m

≥12

middle conical jet washing width

m

≥14

water cannon spraying range

m

≥28

water pump lifts

m

45

self-priming lift

m

6

Fog gun system

Maximum range of fog gun

m

30

Fog gun flow

L/min

20

Rated pressure of air cannon water supply system

MPa

2-3

Fog gun pitch angle

°

-5~60

Fog gun rotation angle

°

-180~180

Driving performance

Max permissible gradient

%

30

braking distance(full load)

m

≤10

Min turning diameter

m

14.5

Chassis parameters

type,manufacturer

BJ1076VEJDA-51

seats

3

engine type,manufacturer

Q23-115C60

engine rated power

85kw/3000r/min

Max engine net power

82kw/3000r/min

Diesel generator set

Rated voltage

V

380


Rated output power


kW

7


Main advantages

1。The water cistern is advanced in structure. The water cistern body uses Q235A material, the interior adopts anti-wave board buffering structure design, and underbed uses frame structure. These ensure the strength and stiffness of overall structures.
Independent power source: the 7kW fuel generator unit is supplied independently, and the chassis speed is not restricted by side force when spraying.
High efficiency and stability: the motor drives the water pump to provide power for the water circuit, the water pressure is 2-3mpa, and the nozzle with small outlet diameter is used to increase the atomization effect and effectively combine the atomization effect with the conveying distance; The fog gun is equipped with automatic left and right rotation and automatic swinging up and down function to expand the spray coverage.
Energy saving and water saving: spray flow is small, only 20L/min, long operation time and low fuel consumption.
Remote control system: use independent remote control equipment and humanized operation mode.

2.Superior in quality
High accessory configuration. Low pressure water pump and pneumatic control components are domestic well-known brands with excellent quality and high reliability.
3
3.Safe and reliable
It has smart music player, which can play music during operating time to caution and remind the surrounding pedestrian to avoid.
It has arrow light to perform the warning function at operating time to remind the surrounding pedestrians to avoid.
4.Various Functions
While the product is equipped with fog gun system, it is also equipped with fully functional low-pressure waterway system, including front duckbill flushing device, middle hedge flushing device, rear sprinkler device, greening irrigation device and water gun.
5. Simple maintenance

The low-pressure waterway system is equipped with a filter, which can effectively filter impurities and prolong the service life of the low-pressure water pump. The filter is arranged at a position convenient for personnel operation.

Operating functions

Item

Name

Picture

Function

Structure & Features

1

Fog gun system

4

It can spray dust, green maintenance, seedling cultivation, new planting irrigation.

The spray distance is 30 m in static wind.
Spray flow 20L/min
Pitch angle - 5 ° ~ 60 °
Rotation angle - 180 °~ 180 °

2

Front duckbilled washing equipment

5

Apply to wash the road and square, etc

Flushing flow: 510L / min
Flushing width: ≥ 6 m
Switch controlled by manual ball valve

3

Middle hedging washing equipment

6

Apply to wash the road and square, etc

Flushing flow: 700L / min
Flushing width: ≥ 14m
Controlled by manual ball valve, two-way flushing, and the nozzle angle can be adjusted freely through threaded rotary joint

4

Rear sprinkling equipment

7

Apply to wash the road and square, etc

Sprinkler flow 600L / min
Watering width ≥ 12m
The manual ball valve controls the opening and closing of the rear sprinkler

5


Greening watering device

8

Watering green belt

Pouring flow 580l / min
Pouring width ≥ 12m
The manual ball valve controls the opening and closing of the rear pouring nozzle

6

Water cannon

9

Apply to long range wash and assist to fire-fighting operation, support omnidirectional rotation.

Water monitor flow 540l / min
Range ≥ 28m
The manual ball valve controls the opening and closing of the water gun. The water gun can rotate 0 ~ 360 ° and the gun body can pitch up and down. The adjusting sleeve at the front of the gun body can adjust the jet shape (cylindrical or conical) of the water flow and close the water gun

7

Self priming device

10

It can be used in places where there is a lack of pressure tap water to realize independent water addition

Self priming height 6M


Optional devices

Item

Name

Picture

Function

Structure & Features

1

Self priming device

11


Upper greening irrigation

Three lotus heads are configured on the left and right respectively, which are located on both sides of the top of the water tank

2

Low pressure reel assembly

12

It can be used for car washing and fixed-point cleaning

It is equipped with 20m hose, reel and spray gun, which is located on the rear operation platform

3

Low pressure hose flushing device

13

It can be used for car washing and fixed-point cleaning

It is equipped with 20m rubber hose and spray gun, which is located on the rear operation platform

4

Arrow light

14

It can play a warning role in the operation and remind the surrounding pedestrians to avoid.



Hot Tags: water tanker truck with spray nozzles, China water tanker truck with spray nozzles suppliers, manufacturers, high pressure washing truck, street washing truck, Zoomlion Multifunctional Low Pressure Power Road Washer, water broom low pressure power washer, 7 Tons Tanker Water Tanker, Low pressure water vehicle

You Might Also Like

(0/10)

clearall